Stats

  • Locked Locked
  • Replies 4
  • Subscribers 125
  • Views 17922
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure Cadence IC after installation

Tony777

Hi everyone,

I have installed Cadence IC 6.15 in a new linux server. This is the first time I did these things. After installation, I don't know how to run it. Because the old server was broken so I cannot refer to it. I know this question is stupid. But, believe me, I have tried for a week. Please help me. Thank so so much.

Parents

  • I followed some instructions and did:

    1/ create a test directory

    2/ in test directory, I create a cadence615.cshrc:

    setenv CDS_Netlisting_Mode "Analog"
    setenv CDS_LIC_FILE 5280@<my_server_license_ip_address>
    setenv SPECTRE_DEFAULTS "-E"

    setenv ASSURAHOME /tools/cadence/assura/assura0410
    set path = ($path $ASSURAHOME/tools/bin $ASSURAHOME/tools/assura/bin)
    setenv LANG C
    setenv SUBSTRATESTORMHOME $ASSURAHOME

    setenv MMSIM_HOME /tools/cadence/mmsim/mmsim1210
    set path = ($path $MMSIM_HOME/tools/bin $MMSIM_HOME/tools/dfII/bin )

    setenv IC_HOME /tools/cadence/ic/ic615
    set path = ($path $IC_HOME/tools/bin $IC_HOME/tools/dfII/bin)

    #set path = ($path /tools/cadence/installscape/iscape/bin)

    setenv LD_LIBRARY_PATH $IC_HOME/tools/lib/
    setenv LM_LICENSE_FILE $CDS_LIC_FILE

    However, when I try to run cadence by, the terminal shows an error:

    tools/cadence/ic/ic615/tools/dfII/bin/32bit/virtuoso: error while loading shared libraries: libXp.so.6: cannot open shared object file: No such file or directory

    I did not copy any files to test directory. There is only cadence615.cshrc file in there. I worry that may I miss any files?

    Please help me.

Reply

  • I followed some instructions and did:

    1/ create a test directory

    2/ in test directory, I create a cadence615.cshrc:

    setenv CDS_Netlisting_Mode "Analog"
    setenv CDS_LIC_FILE 5280@<my_server_license_ip_address>
    setenv SPECTRE_DEFAULTS "-E"

    setenv ASSURAHOME /tools/cadence/assura/assura0410
    set path = ($path $ASSURAHOME/tools/bin $ASSURAHOME/tools/assura/bin)
    setenv LANG C
    setenv SUBSTRATESTORMHOME $ASSURAHOME

    setenv MMSIM_HOME /tools/cadence/mmsim/mmsim1210
    set path = ($path $MMSIM_HOME/tools/bin $MMSIM_HOME/tools/dfII/bin )

    setenv IC_HOME /tools/cadence/ic/ic615
    set path = ($path $IC_HOME/tools/bin $IC_HOME/tools/dfII/bin)

    #set path = ($path /tools/cadence/installscape/iscape/bin)

    setenv LD_LIBRARY_PATH $IC_HOME/tools/lib/
    setenv LM_LICENSE_FILE $CDS_LIC_FILE

    However, when I try to run cadence by, the terminal shows an error:

    tools/cadence/ic/ic615/tools/dfII/bin/32bit/virtuoso: error while loading shared libraries: libXp.so.6: cannot open shared object file: No such file or directory

    I did not copy any files to test directory. There is only cadence615.cshrc file in there. I worry that may I miss any files?

    Please help me.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.