Stats

Locked Locked
Replies 2
Subscribers 125
Views 14489
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ADE-XL Op. Region specs

I'm having an issue with IC6.1.6-64b.101. I'm trying to setup operating region specs for a DC operating point run. The first problem that I found was that I have two transistors with similar instance names. One is M4 and the other is M4C. I'm setting up an operating region spec of vds-vdsat > 50m. If I only select M4 for this spec the results that the simulator chooses are actually the DC operating point numbers from M4C. I got around this on one schematic by choosing both FETs for the spec but only enabling one.

On a 2nd schematic this did not work. Again, if I only choose M4, it selects the operating point results of M4C. However, now when I choose both FETs I get an "eval error" in the results. If I look at the log, it says "unbound variable vdsat".

Has anybody had any luck with this tool?

Thanks ahead of time for your help.

Parents

Andrew Beckett over 10 years ago

This shouldn't happen - please contact customer support (it's possible that the issue has been fixed in a later subversion, but by going through customer support we can check precisely what you're doing and try to repeat it.

Kind Regards,

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Andrew Beckett over 10 years ago

This shouldn't happen - please contact customer support (it's possible that the issue has been fixed in a later subversion, but by going through customer support we can check precisely what you're doing and try to repeat it.

Kind Regards,

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.