Stats

Locked Locked
Replies 10
Subscribers 124
Views 18679
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Command for re-creating netlist

Hi,

I am using Virtuoso, ADE L and and AMS together with the Simulink coupler. The coupler runs on a different computer and I execute the following command remotely to start the simulations (taken from the Simulink coupler tutorial):

echo "Matlab Current directory path is:"
pwd
setenv RUN_DIR /home/me/test/simulation/top/ams/config/netlist
cd $RUN_DIR
echo "irun will start, from this directory:"
pwd
echo "We launch runSimulation"
./runSimulation

However, it seems that this does not re-generate the netlist. Even worse, it does not throw an error (as ADE L does) when I change something but did not hit "Save & Check" or did not re-create the netlist.

What is the command to add before to recreate the netlist?

Also, based on which parameters would that happen? All settings (like design variables etc.) are stored in a certain cellview state.

Thanks!

itos

Parents

ShawnLogan over 10 years ago

Dear itos,

> Now, when I run the ocean script it still used my old netlist, no matter how often I would hit" Check and Save".

Have you tried the solution recommended in Solution ID 1839795? A sample set of ocean commands is provided that define a means to create a netlist from the command line. From my understanding of your issue, it appears to do what you want - i.e., force the netlist to be re-created. I apologize if you have seen this already!

Shawn

http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNumber=1839795
Cancel
Vote Up 0 Vote Down

Cancel

Reply

ShawnLogan over 10 years ago

Dear itos,

> Now, when I run the ocean script it still used my old netlist, no matter how often I would hit" Check and Save".

Have you tried the solution recommended in Solution ID 1839795? A sample set of ocean commands is provided that define a means to create a netlist from the command line. From my understanding of your issue, it appears to do what you want - i.e., force the netlist to be re-created. I apologize if you have seen this already!

Shawn

http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNumber=1839795
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.