Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 14208
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Parametric Analysis: Inconsistent Result

jiahaoli2012

Hi,

I am running a parametric analysis in Cadence. What I basically do is that I sweep a set of Ws, say W1~W5 , each taking three different values which makes it 3^5 different combinations in total, through parametric analysis of ADE,  run a transient analysis and get the result. Then I pick one specific combination that I ran the sweep for, and this time I run a single transient analysis from ADE. The result that I get from this single run is completely different from what I get from the parametric analysis. It is not even among the results of parametric analysis!


Kind regards,

Parents

  • Dear JIiahao Li,

    In my experience with several technologies, this is a common event. The basic issue relates to how your PDK implements handling variables when computing device parameters. As a result, device parameters will differ when a numerical value is assigned as an MOS length (W) when compared to its device W is a variable. I have been able to resolve the difference in performance by contacting our PDK group and reviewing the issue with them. The PDK group updated the PDK to provide identical MOS parameter computations using a variable and numerical value for a specific MOS device physical parameter. I hope this helps you.

    Shawn

Reply

  • Dear JIiahao Li,

    In my experience with several technologies, this is a common event. The basic issue relates to how your PDK implements handling variables when computing device parameters. As a result, device parameters will differ when a numerical value is assigned as an MOS length (W) when compared to its device W is a variable. I have been able to resolve the difference in performance by contacting our PDK group and reviewing the issue with them. The PDK group updated the PDK to provide identical MOS parameter computations using a variable and numerical value for a specific MOS device physical parameter. I hope this helps you.

    Shawn

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.