Stats

  • Locked Locked
  • Replies 1
  • Subscribers 125
  • Views 12793
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Intermediate Modeling Parameter Extraction

jiahaoli2012

Hi,


Is there any way to get the semifinished products from Cadence during the shifting process (calculation) from the device model to the MOSFET model. I am talking about the intermediate parameters which are used in BSIM modeling to eventually  get to the final transistor parameters, such as ueff, Esat, Abulk, etc.?


Kind regards,

JIiahao

  • Hi JIiahao,

    There are some parameters, but not all of them. The only available parameters can be found in the "spectre -h bsim4" output, in the sections labelled:

    =================
    Output Parameters
    =================

    and

    ==========================
    Operating Point Parameters
    ==========================

    Not sure if this is going to help you. This is all there is though...

    Regards,

    Andrew.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.