• Skip to main content
  • Skip to search
  • Skip to footer
Cadence Home
  • This search text may be transcribed, used, stored, or accessed by our third-party service providers per our Cookie Policy and Privacy Policy.

  1. Community Forums
  2. Custom IC Design
  3. Manufacturing grid/ Routing grid

Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 15758
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Manufacturing grid/ Routing grid

Cristina Ibane
Cristina Ibane over 8 years ago

Hi!

Is there any way to customize the values for these 2 grids? I understand they are currently read from the tech file and I do not want to touch that.

I have found some answers related to creating a new constraints group and defining the new grid, but I do not find any process rule that would allow me to do that.

Just to be clear: in my environment, package metal needs to be routed with a different grid from the rest. If I use paths to do this, my 45degrees angles won't respect the bigger grid. The only solution I found is SKILL snapping them to grid, but only after converting them into polygons, which is not exactly what I would like to do each and every time on each and every package.

Any input is highly appreciated! Thanks!

  • Cancel
Parents
  • Andrew Beckett
    Andrew Beckett over 8 years ago

    Paths inherently have their outside vertices off grid if you have 45-degree segments, because they have constant width. You should use pathSegs (via the Create Wire command) as these are designed to keep the edge vertices (and centre vertices) on the manufacturing grid.

    Andrew.

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Reply
  • Andrew Beckett
    Andrew Beckett over 8 years ago

    Paths inherently have their outside vertices off grid if you have 45-degree segments, because they have constant width. You should use pathSegs (via the Create Wire command) as these are designed to keep the edge vertices (and centre vertices) on the manufacturing grid.

    Andrew.

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.

© 2025 Cadence Design Systems, Inc. All Rights Reserved.

  • Terms of Use
  • Privacy
  • Cookie Policy
  • US Trademarks
  • Do Not Sell or Share My Personal Information