• Skip to main content
  • Skip to search
  • Skip to footer
Cadence Home
  • This search text may be transcribed, used, stored, or accessed by our third-party service providers per our Cookie Policy and Privacy Policy.

  1. Community Forums
  2. Custom IC Design
  3. Monte Carlo analysis with vprbs

Stats

  • Locked Locked
  • Replies 1
  • Subscribers 125
  • Views 13601
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Monte Carlo analysis with vprbs

Mirco Controller
Mirco Controller over 8 years ago

Hi,

i have setup a testbench that contains a vprbs source. When running a monte carlo analysis with e.g. 200 points only the first point differs from previous started runs.

All other points are equal (min=max=mean). When i remove the vprbs source the mc-analysis works as expected.

The source has not to be connected (in fact i do a dc analysis). When changing the sampling method to "Low-Discrepancy Sequence" insted of "Random" it starts working again.

Is there a way to use the Random sampling method in combination with a vprbs source?

Version: IC6.1.6-64b.500.13

Best regards

Mirco

  • Cancel
Parents
  • Andrew Beckett
    Andrew Beckett over 8 years ago

    I believe this is the issue described in Presence of vprbs cell from analogLib affects Monte Carlo results

    The issue is fixed in MMSIM151 ISR10 or later (it's not the IC version that matters, but the MMSIM version). So you either need this hotfix of MMSIM151 or later, or any SPECTRE161 version.

    Regards,

    Andrew.

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Reply
  • Andrew Beckett
    Andrew Beckett over 8 years ago

    I believe this is the issue described in Presence of vprbs cell from analogLib affects Monte Carlo results

    The issue is fixed in MMSIM151 ISR10 or later (it's not the IC version that matters, but the MMSIM version). So you either need this hotfix of MMSIM151 or later, or any SPECTRE161 version.

    Regards,

    Andrew.

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.

© 2025 Cadence Design Systems, Inc. All Rights Reserved.

  • Terms of Use
  • Privacy
  • Cookie Policy
  • US Trademarks
  • Do Not Sell or Share My Personal Information