Stats

  • Locked Locked
  • Replies 3
  • Subscribers 126
  • Views 21111
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Failed to initialize incremental netlisting

sjwprc

Hello,

    The log content:

\o ERROR (OSSHNL-153): Failed to initialize incremental netlisting because the run directory contains
\o netlist data from the previous netlisting session which has a corrupt global
\o map structure file '/xxx/maestro/results/maestro/Interactive/1/xxx/netlist/ihnl/globalmap'. Remove the "ihnl" and "map" directories from the
\o current run directory and netlist again.
\o 
\o "ERROR (OSSHNL-512): Failed to generate netlist because incremental netlisting data from the previous session is corrupt or missing. Clean the run directory and netlist the entire design.\n"
\o End netlisting Mar 6 12:02:05 2019
\o ERROR (OSSHNL-514): Netlist generation failed because of the errors reported above. The netlist might not have been generated at all, or the generated netlist could be corrupt. Fix the reported errors and regenerate the netlist.
\o ...unsuccessful.

Failure description:

Maestro is mapped from adexl by "open with". Test_A is defined by config.  Simulation using adexl is fine. 

When run sim with Maestro (assembler), such incremental netlist problem happen. 

When define Test_A by schematic, no problem. 

I try to re-start cadence, remove history, not fix. 

Anyone has clue ?

BR

Parents

  • Hi,

    What IC version are you working with?  This may be fixed in a newer version. ( Help-> About Virtuoso)

    1. Try to do a complete re-netlist, not incremental  ( right mouse on test, netlist ..)

    2. Try to delete the simulation directory of the old run..or move it away if you want to keep it.

    Marc

Reply

  • Hi,

    What IC version are you working with?  This may be fixed in a newer version. ( Help-> About Virtuoso)

    1. Try to do a complete re-netlist, not incremental  ( right mouse on test, netlist ..)

    2. Try to delete the simulation directory of the old run..or move it away if you want to keep it.

    Marc

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.