Stats

  • Locked Locked
  • Replies 0
  • Subscribers 125
  • Views 13001
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Timestamp warning when using ADE Assembler (Maestro)

HoWei

Hi,

we get warnings since we corrected our server time to the correct timezone:

tar: ./.designVariables: time stamp 2019-04-07 23:02:13 is 13.484168035 s in the future
tar: ./.tmiParams: time stamp 2019-04-07 23:02:13 is 13.481819238 s in the future
tar: ./.stimulusFile: time stamp 2019-04-07 23:02:13 is 13.388030093 s in the future
tar: ./.modelFiles: time stamp 2019-04-07 23:02:13 is 13.385158075 s in the future
tar: ./.definitionFiles: time stamp 2019-04-07 23:02:13 is 13.382753125 s in the future
tar: ./input.scs: time stamp 2019-04-07 23:02:13 is 13.379897717 s in the future

The reason might be the time difference between our compute-servers and the NFS-mount where we put our data - The NFS time is ~14s in the future.

This only happens when using ADE Assembler (not with ADE-L - ADE XL has not been tested).

Is this a critical issue and if not - can this warning be disabled ?

Of course we are working on adjusting the time of both servers and NFS to the same time ...

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.