Stats

  • Locked Locked
  • Replies 4
  • Subscribers 126
  • Views 17183
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Send dc match results to the outputs

unSkilled

IC6.1.7-64b.500.13

Hi all,

I wonder if there's a possibility of sending the results of a dc match simulation directly to the ADE-L outputs window. Typically, a summary of the dc match results can be seen in the output log of the simulation, but it would be really convenient to be able to see the mismatch result directly as is done with other measurements coming from stb analysis via results > Direct Plot > main form. In any case, if there's an alternative way to do so I'd be thankful if you can share it here.

Regards,

Lewis

Parents
  • mschw

    Dear Lewis,

    i don't know whether there is a direct way to add the result of a dcmatch analysis to the ADE-L outputs.
    You could try to open the simulation results in the ViVA Browser and search there for the corresponding signal(s).
    From ViVA you can send these signals to the calculator or the ADE.

    Kind regards,

    Matthias

  • unSkilled
    in reply to mschw

    Dear Andrew and mschw,

    As soon as I tried to explain myself better here, I realized there is a totalOutput folder in the results browser that contains the summary value "sigmaOut(V)", which is exactly what I need. Sending that into the calculator yields the following expression:

    pv("/totalOutput" "sigmaOut" ?result "dcmatch")

    From there I can simply send it as usual using the get expression button in the ADE-L Setting Outputs.

    Thanks a lot for your help!

    Regards,

Reply
  • unSkilled
    in reply to mschw

    Dear Andrew and mschw,

    As soon as I tried to explain myself better here, I realized there is a totalOutput folder in the results browser that contains the summary value "sigmaOut(V)", which is exactly what I need. Sending that into the calculator yields the following expression:

    pv("/totalOutput" "sigmaOut" ?result "dcmatch")

    From there I can simply send it as usual using the get expression button in the ADE-L Setting Outputs.

    Thanks a lot for your help!

    Regards,

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.