Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 13566
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

assura rcx fails

jyoti kandpal

hello everyone,

when I do the post-layout simulation of the inverter there is an error in RCx extraction,  images of that error I also attached below. please resolve my problem.

Parents
  • Andrew Beckett

    First of all you appear to be using the very old (and unsupported Assura RCX which has been replaced many, many years ago with Quantus QRC; you can use Assura LVS first and then Quantus QRC to do the extraction part).

    You're also using ancient versions of the tools.

    However, this appears that you have either given the run name or run directory incorrectly, or you didn't run LVS first?

    Andrew.

Reply
  • Andrew Beckett

    First of all you appear to be using the very old (and unsupported Assura RCX which has been replaced many, many years ago with Quantus QRC; you can use Assura LVS first and then Quantus QRC to do the extraction part).

    You're also using ancient versions of the tools.

    However, this appears that you have either given the run name or run directory incorrectly, or you didn't run LVS first?

    Andrew.

Children
  • jyoti kandpal
    in reply to Andrew Beckett

    thanks @Andrew Beckett for your valuable advice, I have found my mistake.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.