Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 12984
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error in abutment of transistor Pcells

MSP032

Hi,

I am getting the below message when trying to abut two transistor Pcells, inside a Modgen.

*WARNING* (LX-2206): Unable to abut the following two instances:
 'ModgenDummy_0_0_Modgen_1' (instance of cell 'egupfet_b')
 'P0' (instance of cell 'egupfet_b')
This occurred because the required abutment data is incorrect
or missing on the pin figures in the masters of these instances.
*WARNING* (LX-2206): Unable to abut the following two instances:
 'ModgenDummy_1_0_Modgen_1' (instance of cell 'egupfet_b')
 'P1' (instance of cell 'egupfet_b')
This occurred because the required abutment data is incorrect
or missing on the pin figures in the masters of these instances.
.

Please let me know a possible reason for this error.

Thanks,
Mallikarjun

  • Andrew Beckett

    You should contact customer support. Trying to debug this in the forums is going to be rather difficult as it would be much easier to see the data.

    Andrew.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.