Stats

  • Locked Locked
  • Replies 4
  • Subscribers 125
  • Views 14958
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Layout xl highlight dimming vs selecting

Moaz Elshamy

When using net highlighting option in Layout XL, the dimming option for other nets and layers is enabled. It acts as a shadow effect. It makes other objects darker.

I want to enable the same effect on the cyclic option between schematic and layout. For example, when selecting a device in the schematic, it is selected in the layout. I want the selected object in the layout to get this dimming effect. However, it is better to be enabled only if the devices selected from the schematic. Because, sometimes it is hard to spot the selected devices in the layout, so the dimming effect would help in this.

Is there something similar to the following command but for the cyclic selection between schematic and layout?

layout displaySelectionHighlightWhenDimmed boolean { t | nil }

Parents
  • Andrew Beckett

    Which version are you using? I just checked in IC6.1.8 ISR14 (so it would be the same in ICADVM20.1), and just turning on "Enable Dimming" on Options->Display in the layout editor does what (I think) you want (I have Scope set to "none" - the default). If I select something in the schematic, the corresponding instance is selected on the layout side, and everything else is dimmed. The cdsenv var you refer to corresponds to the "True Color Selection only" checkbox in the dimming section - if turned on, then that's equivalent to that env var being nil (it means it doesn't draw a highlight around the selected instance). 

    So it's not clear to me what isn't working... have you turned dimming on via the Display Options form?

    Andrew.

Reply
  • Andrew Beckett

    Which version are you using? I just checked in IC6.1.8 ISR14 (so it would be the same in ICADVM20.1), and just turning on "Enable Dimming" on Options->Display in the layout editor does what (I think) you want (I have Scope set to "none" - the default). If I select something in the schematic, the corresponding instance is selected on the layout side, and everything else is dimmed. The cdsenv var you refer to corresponds to the "True Color Selection only" checkbox in the dimming section - if turned on, then that's equivalent to that env var being nil (it means it doesn't draw a highlight around the selected instance). 

    So it's not clear to me what isn't working... have you turned dimming on via the Display Options form?

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.