Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 12429
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Simulation is getting stuck when running AMS simulation with SimVision

RFStuff

Dear All,

I am running a AMS simulation with  SimVision (interactive debugmode).

The netlist is getting created but the simulation is not running further. I see the following in CIW and irun.log when the simulation is getting stuck forever:-

Parents

  • Probably not a great deal that can be diagnosed here without seeing it, so customer support would be your best option. That said, I think in an earlier post you were using INCISIVE152. I'd strongly suggest using a more recent version (e.g. XCELIUM2009) since you're using something that's a good 5 years old... it's pretty likely that whatever issue you're facing has been fixed in the intervening time

    Andrew

Reply

  • Probably not a great deal that can be diagnosed here without seeing it, so customer support would be your best option. That said, I think in an earlier post you were using INCISIVE152. I'd strongly suggest using a more recent version (e.g. XCELIUM2009) since you're using something that's a good 5 years old... it's pretty likely that whatever issue you're facing has been fixed in the intervening time

    Andrew

Children

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.