Stats

  • Locked Locked
  • Replies 0
  • Subscribers 125
  • Views 8387
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ADE Datasheet Generation Problems

SteveDobbs

Using ICADVM 18.10.130

I experience a number of problems when creating a datasheet, specifically in trying to control what is plotted.

I generally use the "Open Graphs" option having plotted what I want to be written to the datasheet

I am using an in-house simulator - don't know if this is a factor

1. If the run contains, say, 2 tests and I plot a waveform from only one test, the generator creates plots of all waveforms from the other test (as if default is ALL if nothing is plotted from a particular test)

2. In a monte-carlo run, if I plot a histogram for a single output expression it is not written to the datasheet

3. If I plot an output from the swapSweep function (having selected EvalType=All in the ADE GUI for the output in question) it is not written to the datasheet

Anybody else see similar issues?

Any workarounds?

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.