Stats

  • Locked Locked
  • Replies 1
  • Subscribers 125
  • Views 9343
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

post layout extracted simulation

abdurrahman0234

Hi everyone.

At the post layout simulatıon, I can not get voltage currents on the nets for the inside of subblock  at the dc simulatıon or  transient sımulatıon for the transient analysis. Why? 

Parents
  • ShawnLogan

    Dear abdurrahman0234,

    1. Did you save the nets you are interested in and what was the format in which you saved them?

    2. How are you trying to "get" the "voltage currents on the nets"?

    3. Have you studied the On-line support article "FAQ: How to probe current/voltage of an internal node in extracted view" concerning accessing nets within an extracted view block contained in a netlist?

    https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nVaYEAU&pageName=ArticleContent

    4. There is also a video describing out-of-context probing at:

     Out of Context Probing and Plotting in Virtuoso ADE Explorer and Assembler (Video)

    Without more information about your specific issue, I can't provide more specific suggestions. Sorry!

    Shawn

Reply
  • ShawnLogan

    Dear abdurrahman0234,

    1. Did you save the nets you are interested in and what was the format in which you saved them?

    2. How are you trying to "get" the "voltage currents on the nets"?

    3. Have you studied the On-line support article "FAQ: How to probe current/voltage of an internal node in extracted view" concerning accessing nets within an extracted view block contained in a netlist?

    https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nVaYEAU&pageName=ArticleContent

    4. There is also a video describing out-of-context probing at:

     Out of Context Probing and Plotting in Virtuoso ADE Explorer and Assembler (Video)

    Without more information about your specific issue, I can't provide more specific suggestions. Sorry!

    Shawn

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.