Stats

Locked Locked
Replies 7
Subscribers 125
Views 5594
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Very slow ADEXL datasheet generation

Hi All,

The datasheet creation takes till 12 hours when an ADEXL datasheet is generated that processes more than 1000 simulations (like MC simulations); moreover, sometimes the generation stops in the between with the following error (which I guess is due to exceeded timeout coming from the job setup + job running locally instead of being dispatched on a more performant machine):

Has someone of you faced the same issue? Or, do you have any suggestion how to run the datasheet creation not on on the local host or how to speed up the generation of it?

Thanks a lot in advance!

Parents

Andrew Beckett over 1 year ago

Do you have "save statistical data" enabled on the Monte Carlo options form? This can lead to slowness (I've found some reports at least of this) in the data sheet generation. Also, are you saving family waveforms and plotting lots of waveforms?

Which IC sub-version are you using?

Andrew
Cancel
Vote Up 0 Vote Down

Cancel
markris over 1 year ago in reply to Andrew Beckett

Hi Andrew,

Yes, the statistical data export is enabled in this specific case. Regarding the waveforms, instead, the option is disabled during the datasheet creation (in order to try to speed-up the generation of it).

Instead, regarding the IC sub-version, the one used is the following:
Cancel
Vote Up 0 Vote Down

Cancel
Andrew Beckett over 1 year ago in reply to markris

Can you try without saving the statistical parameters to see if that makes a difference?

Otherwise, I suggest you contact customer support.

Regards,

Andrew
Cancel
Vote Up 0 Vote Down

Cancel
markris over 1 year ago in reply to Andrew Beckett

Yes, I will give a try and let you know.
Cancel
Vote Up 0 Vote Down

Cancel
markris over 1 year ago in reply to Andrew Beckett

Hi Andrew, sorry for the late reply.. unfortunately this does not help.. it seems that it is really a Cadence issue when a datasheet for many runs has to be generated. I tried also reducing the number of runs to 600, but it took up to 2 days to generate a datasheet! Did you try on your side if you have the same issue?
Cancel
Vote Up 0 Vote Down

Cancel
Andrew Beckett over 1 year ago in reply to markris

I didn't test this (you're using an old version too), so I would suggest you first try the latest ISR (since the version you're using is over 3 years old) and if that doesn't help contact customer support (submit a case after logging in) as I suggested before.

Andrew
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Andrew Beckett over 1 year ago in reply to markris

I didn't test this (you're using an old version too), so I would suggest you first try the latest ISR (since the version you're using is over 3 years old) and if that doesn't help contact customer support (submit a case after logging in) as I suggested before.

Andrew
Cancel
Vote Up 0 Vote Down

Cancel

Children

markris over 1 year ago in reply to Andrew Beckett

Ok, I will do so. To change Cadence version is tricky due to project contraints. However; I will try also that and in case contact the customer support.
Cancel
Vote Up 0 Vote Down

Cancel

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.