Stats

  • Locked Locked
  • Replies 1
  • Subscribers 125
  • Views 3326
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Use variation for sweep different files in AMS simulation

nonameirvine

I would like to include 2 different files in the same path in ams simulation, so I define a variation naming nfile with two value nfile1 and nfile2, then in my ams including options I set ../path/VAR("nfile")
but it cannot do netlist. could you advise a way to sweep it?

  • What kind of file are you trying to include and from which UI? You can do this with Spectre files by adding (in the model library form) if you just put VAR("nfile") (without the path part) and add the path into Setup->Simulation Files->Include Path. The variable can then be set to "file1.scs" (with the quotation marks) and it will work.

    You cannot do this in AMS with either Verilog files (on Simulator->Options->AMS...) or with stimulus or definition files on Setup->Simulation Files.

    Andrew

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.