Stats

  • Locked Locked
  • Replies 9
  • Subscribers 144
  • Views 17323
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

layout instances name connected in a selected net.

marbs

Hello All,

How to display all the layout instances name in CIW that is connected

in the selected net in layout  ?  

 For example, if I select a net25 in the layout, in CIW, output will be,

net25 is connected in Q1-c , Q2b, Q3e .

 

Thanks in advance,

 

Marbs 

 

Parents
  • marbs

    Hi Andrew,

    Thank you for the code, but what I want to display are only the layout instances name

    that are presently connected in the selected wires(M, SM, TM ), not all its complete

    connection as it is stated in schematic.

    For example:

    net 94 schematic connection is |Q23.B , |Q23.C , |Q24.B and |Q25.C

     but in my layout :

    net 94 is only connected to |Q23.B and |Q24.B  

    If I select the wire in layout  presently connected to  |Q23.B and |Q24.B

    The output in CIW must be : The selected net net 94 is presently connected to |Q23.B and |Q24.B . Wire in layout

                                              not yet complete .

     

     

    I am sorry for  not clearing my first message.

    Please help.   

     

    Regards,

    Marbs 

Reply
  • marbs

    Hi Andrew,

    Thank you for the code, but what I want to display are only the layout instances name

    that are presently connected in the selected wires(M, SM, TM ), not all its complete

    connection as it is stated in schematic.

    For example:

    net 94 schematic connection is |Q23.B , |Q23.C , |Q24.B and |Q25.C

     but in my layout :

    net 94 is only connected to |Q23.B and |Q24.B  

    If I select the wire in layout  presently connected to  |Q23.B and |Q24.B

    The output in CIW must be : The selected net net 94 is presently connected to |Q23.B and |Q24.B . Wire in layout

                                              not yet complete .

     

     

    I am sorry for  not clearing my first message.

    Please help.   

     

    Regards,

    Marbs 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.