Stats

  • Locked Locked
  • Replies 4
  • Subscribers 142
  • Views 7552
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How generate spectre netlist with model parameters

TiNat
Hi, My systerm info. as following: icfb : 5.10.41. I would like to find a method of generating spectre netlists which contains all model parameters. Now my netlist contains only path of model library. Thank you for your solution.
Parents
  • OK, in that case, maybe what you need to do is to create a file (with a
    ".scs" suffix), containing the following:

    //
    modelParamsReport info what=models where=file

    Then reference this file using Setup->Model Libraries in ADE. What it
    will do is generate a file in the netlist directory which contains the
    model info. You can provide the file= parameter to tell it exactly where
    to put it if you want (see "spectre -h info" for details).

    This will then output the information about which models were used, and
    all the parameters.

    ADE normally tells spectre to save the same information, but it goes
    into a binary result database (you can see this in the results browser)
    and this then allows you to annotate model parameters onto the schematic
    via the Results->Annotate menu. So you'll see several "info" analyses
    in your netlist at the bottom telling to save such information. The
    above approach allows you to also save the information to a text file.

    Best Regards,

    Andrew.
Reply
  • OK, in that case, maybe what you need to do is to create a file (with a
    ".scs" suffix), containing the following:

    //
    modelParamsReport info what=models where=file

    Then reference this file using Setup->Model Libraries in ADE. What it
    will do is generate a file in the netlist directory which contains the
    model info. You can provide the file= parameter to tell it exactly where
    to put it if you want (see "spectre -h info" for details).

    This will then output the information about which models were used, and
    all the parameters.

    ADE normally tells spectre to save the same information, but it goes
    into a binary result database (you can see this in the results browser)
    and this then allows you to annotate model parameters onto the schematic
    via the Results->Annotate menu. So you'll see several "info" analyses
    in your netlist at the bottom telling to save such information. The
    above approach allows you to also save the information to a text file.

    Best Regards,

    Andrew.
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.