Stats

  • Locked Locked
  • Replies 17
  • Subscribers 145
  • Views 28750
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

pPar not works for intiger CDF parameters

Sarvani

 Hi all,

        Is pPar works for all CDF parameters? I need to pass intiger numbers (like no. of fingers) from top level to bottem level in schematic. But when I enter pPar(NF) through edit object properties options then it doesn't work's. How can I get this intiger values to bottom level? Let me know if any other set up is needed.

thankyou,

sarvani

Parents

  • Hi Sarvani,

    I think that you have to do some other basic tests:

    - first use same w everywhere without using pPar() , be sure you got LVS clean

    - when LVS is clean try to play with pPar()

     

    If the problem is still there, then it will be much easy for the others to find the problem if you can provide the "some error's in LVS"  and at least the netlist generated from schematic.

     Best Regards,

    Marcel

Reply

  • Hi Sarvani,

    I think that you have to do some other basic tests:

    - first use same w everywhere without using pPar() , be sure you got LVS clean

    - when LVS is clean try to play with pPar()

     

    If the problem is still there, then it will be much easy for the others to find the problem if you can provide the "some error's in LVS"  and at least the netlist generated from schematic.

     Best Regards,

    Marcel

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.