Stats

  • Locked Locked
  • Replies 3
  • Subscribers 143
  • Views 13669
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Skill function to open schematic and check a box from dropdown

vijay2912

Hi 

I'm new to skill programming,

I would like to know if this is possible using skill , my problem is

open a schematic-->open a setting form(ex: Create-->Cellview-->from Cellview)--> click on a button

and  disable the checkbox(ex: Display Cellview....remove the tick mark)

I would like to automate this procedure and generate different netlists for lot of cells.

please let me know if this is possible using skill function 

 

regards

Vijay 

Parents
  • vijay2912

    Hi Andrew 

    Thanks for the reply.

    I'm sorry it was not a precise explaination of the issue, as i'm not supposed to post everything here.

     let me put it this way.

    we have a dropdown menu embeded in the schematic view which is internal to our org. when ever we netlist(hspice netlist) we pull down the menu, select netlist and then click on a button "Hspice Options" and then check the box against "Convert to decimals?" (as true)

    and then click "ok" and the final step is to "Apply" to get the netlist generated.

     

    I would like to automate this procedure as I have multiple cells to be netlisted. and hence was looking for similar steps in default cadence dropdown to project it to you guys.

     

    please let me know if its possible with skill

     

    thanks alot again Andrew

     

    regards

    Vijay 

Reply
  • vijay2912

    Hi Andrew 

    Thanks for the reply.

    I'm sorry it was not a precise explaination of the issue, as i'm not supposed to post everything here.

     let me put it this way.

    we have a dropdown menu embeded in the schematic view which is internal to our org. when ever we netlist(hspice netlist) we pull down the menu, select netlist and then click on a button "Hspice Options" and then check the box against "Convert to decimals?" (as true)

    and then click "ok" and the final step is to "Apply" to get the netlist generated.

     

    I would like to automate this procedure as I have multiple cells to be netlisted. and hence was looking for similar steps in default cadence dropdown to project it to you guys.

     

    please let me know if its possible with skill

     

    thanks alot again Andrew

     

    regards

    Vijay 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.