Stats

  • Locked Locked
  • Replies 3
  • Subscribers 144
  • Views 14933
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Create MPP using custom template

DenisAdamcho

Hello,

I would like to start creating an MPP with a pre-selected template using SKILL. So instead of clicking "Create MPP" and then changing the template the user could start drawing using the custom template that was created earlier.

When launching the lxHiCreateMPP() it starts an enter function so it is impossible to change the value of the template field using SKILL once its running.

Only solution I can think of is to create the form that is used for the MPP(leRodMppForm) in the background and change the value of the field that specifies the template used(rodMPPTemplate).

Is there a way to create this form without starting the enter function? Or is there a different approach that can be used to solve this problem?

Thanks,

Denis

Parents
  • psill000

    Not sure I understand what you want, but here might be starting point for to work on

    procedure(myMpp(opt)
    leRodMppForm~>rodMPPTemplate~>value= opt
    leHiCreateMPP()
    ); end of myMpp

    The above script will change the mpp template, but you need to load the file with all your mpp templates.
    Some potential bugs with this script.
    1) You need to load the template file. You can do it manually when you start the session or have a script load the template.

    2) The template gui may not be generated when you first execute the command and get a warning/error about an unknown form.

    Paul

Reply
  • psill000

    Not sure I understand what you want, but here might be starting point for to work on

    procedure(myMpp(opt)
    leRodMppForm~>rodMPPTemplate~>value= opt
    leHiCreateMPP()
    ); end of myMpp

    The above script will change the mpp template, but you need to load the file with all your mpp templates.
    Some potential bugs with this script.
    1) You need to load the template file. You can do it manually when you start the session or have a script load the template.

    2) The template gui may not be generated when you first execute the command and get a warning/error about an unknown form.

    Paul

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.