Stats

  • Locked Locked
  • Replies 2
  • Subscribers 143
  • Views 13830
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

warning of Acde in Cadence Virtuoso

Anum Khan

Hello Sir,

I am Anum Khan i am working on a project of designing a Low Power Low Noise Op-amp on Cadence Virtuoso version IC6.1.5.500.12

when i run the simulation it gives the warning of 'Acde' = 240.24e-03 is unusually small.

Can you please explain what does Acde means and how can i fix it ?

Thank You

Best Regards,

Anum Khan

Parents

  • Dear Sir,

    I am sorry for posting m question in a wrong forum. I will be careful for the next time.

    The spectre version i am using is 11.1.0.214 and the technology is LFoundary 0.15um

    Warning from spectre during initial setup.
    WARNING (CMI-2419): M9.pmos1v8lvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): M9: `Acde' = 240.24e-03 is unusually small.
    WARNING (CMI-2419): M10.pmos1v8hvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): M10: `Acde' = 240.24e-03 is unusually small.
    WARNING (CMI-2419): McascP.pmos1v8hvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): McascP: `Acde' = 240.24e-03 is unusually small.
    WARNING (CMI-2419): M8.pmos1v8hvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): M7: `Acde' = 240.24e-03 is unusually small.

    Is there any solution for this?

    Regards,

    Anum Khan

     

Reply

  • Dear Sir,

    I am sorry for posting m question in a wrong forum. I will be careful for the next time.

    The spectre version i am using is 11.1.0.214 and the technology is LFoundary 0.15um

    Warning from spectre during initial setup.
    WARNING (CMI-2419): M9.pmos1v8lvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): M9: `Acde' = 240.24e-03 is unusually small.
    WARNING (CMI-2419): M10.pmos1v8hvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): M10: `Acde' = 240.24e-03 is unusually small.
    WARNING (CMI-2419): McascP.pmos1v8hvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): McascP: `Acde' = 240.24e-03 is unusually small.
    WARNING (CMI-2419): M8.pmos1v8hvt: `imax' = 1 A is larger than `imelt' = 10.9 mA. `imelt' is increased to `imax'.
    WARNING (CMI-2424): M7: `Acde' = 240.24e-03 is unusually small.

    Is there any solution for this?

    Regards,

    Anum Khan

     

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.