Stats

  • Locked Locked
  • Replies 12
  • Subscribers 93
  • Views 8584
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

encounter -error while loading design

gops
**ERROR: (SOCLF-82): Macro "DFSECP1" obs coordinate y value 9.0740 isn't on manufacturing grid. It's likely result in placement/routing that can't be manufactured How could i solve this error?
Parents

  •  Technically, you should have the library vendor fix this LEF. You could fix it yourself if you feel confident doing such things. However, since an OBS (obstruction) is not a manufacturable shape, you can ignore this offgrid warning. If you ever get an offgrid warning about pins, nets/wires, cell placements, etc. then those MUST be fixed.

Reply

  •  Technically, you should have the library vendor fix this LEF. You could fix it yourself if you feel confident doing such things. However, since an OBS (obstruction) is not a manufacturable shape, you can ignore this offgrid warning. If you ever get an offgrid warning about pins, nets/wires, cell placements, etc. then those MUST be fixed.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.