Stats

  • Locked Locked
  • Replies 6
  • Subscribers 91
  • Views 14505
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Static power analysis with SOC

DavidBD

 Hello,

I would like to generate power report using the following corner :

- RC = CWORST

- PVT =  BC

The inputs are :

- Netlist

- DEF

- SDC

 I would like to generate static report ( no activity file) ( using SOC 8.1 )

 

 

Parents

  •  Hi David,

    I assume you mean a power consumption report (command reportPower). If you are using MMMC, then you should have a view set up with BC .libs and rc_corner of CWORST. Then you can just set that as the active view and run reportPower with the options of your choosing. If you're not using MMMC, then the design should be loaded with the BC .libs and you should have run an RC extraction with a CWORST QRC tech file or FE captable. I'm not sure if this completely answers your question.

     - Kari

Reply

  •  Hi David,

    I assume you mean a power consumption report (command reportPower). If you are using MMMC, then you should have a view set up with BC .libs and rc_corner of CWORST. Then you can just set that as the active view and run reportPower with the options of your choosing. If you're not using MMMC, then the design should be loaded with the BC .libs and you should have run an RC extraction with a CWORST QRC tech file or FE captable. I'm not sure if this completely answers your question.

     - Kari

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.