Stats

  • Locked Locked
  • Replies 5
  • Subscribers 92
  • Views 1351
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

need to access the first registers to I/O pads using db commands

abhaska

Hi all

 I need to access the first registers  to i/o pads using db commands... i've used procedures calling technique.. i'm able to access the

instances upto 2nd level.. but unable to further proceed  through the path as the instance are more between i/os and registers.

I've used a pointer  for the further access of the instances by recalling the procedure.. but the infinite loop prob occurs..

Can anyone pls help me in this regard..

Thanks

Arun

 

Parents
  • abhaska

    yes, 2nd level means logic depth.. if a register is not accessed in the trace path from i/o pad

    then my pointer has to keep on accessing until a register is found..

    This fashion has to be continued for every terminal of I/O pad and every net the terminals are

    connected to..

    Thanks

    Arun

Reply
  • abhaska

    yes, 2nd level means logic depth.. if a register is not accessed in the trace path from i/o pad

    then my pointer has to keep on accessing until a register is found..

    This fashion has to be continued for every terminal of I/O pad and every net the terminals are

    connected to..

    Thanks

    Arun

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.