Stats

  • Locked Locked
  • Replies 3
  • Subscribers 91
  • Views 14622
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to remove empty module after optDesign?

archive

After mijn optDesign run in PostCts-stage I've got following messages:

Found empty module (abl_frss_SHELL_BUF_SPC_65).
Found empty module (abl_ivnss_6c_8l_SHELL_BUF_SPC_88).
Found empty module (abl_ivnss_6c_8l_SHELL_BUF_SPC_120).
Found empty module (abl_ivnss_6c_8l_SHELL_BUF_SPC_121).
Found empty module (abl_ivnss_6c_8l_SHELL_BUF_SPC_122).
Found empty module (abl_ivnss_6c_8l_SHELL_BUF_SPC_123).
Found empty module (abl_ivnss_6c_8l_SHELL_BUF_SPC_124).
Found empty module (abl_ivnss_6c_8l_SHELL_BUF_SPC_125).
Found empty module (glrd_pinmux_TCB_SHADOW_FF_SPC_16).
Found empty module (glrd_pinmux_TCB_SHADOW_FF_SPC_17).
Found empty module (glrd_pinmux_TCB_SHADOW_FF_SPC_18).

How can I remove these cells (which are generated by FE) after optimize? Because I've
got some mismatchs for my LVS-run and I dont want to modified my netlist.

Thanks and Regards,


Originally posted in cdnusers.org by DN
Parents Reply Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.