Stats

  • Locked Locked
  • Replies 4
  • Subscribers 91
  • Views 14999
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to snap io pins on to routing tracks????

NAADHAN

Hi all :-),

      I had a problem when i tried to snap the pins on to the track during my floorplan.According to my floorplan my pins are on the either sides(left and right) of the FP.
When i tried to snap io pins on to the tracks all the pins from rightside of my die came to the left and it was equally spread......But what i intended was to retain the original sides(right & left as such) and just want to adjust the IO s on to the tracks.Is there any way to do it????

I tried it with Edit-->Pin Editor.

FYI:
         Am using Encounter 7.1

 

Thanks & Regards,

NAADHAN

Parents

  •  Hi Naadhan,

    Instead of snapping all the pins at once, select just the pins on the left and snap, then the pins on the right and snap. With the pin editor form up, you can sort the pins by which side they are on to make selecting them easy. Let me know if this works, or if you need more explanation.

    - Kari

Reply

  •  Hi Naadhan,

    Instead of snapping all the pins at once, select just the pins on the left and snap, then the pins on the right and snap. With the pin editor form up, you can sort the pins by which side they are on to make selecting them easy. Let me know if this works, or if you need more explanation.

    - Kari

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.