Stats

  • Locked Locked
  • Replies 1
  • Subscribers 90
  • Views 13643
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Width of shield nets

KVBABU

While performing routing with nondefault rules in SOC Encounter 7.1, i wish to get shielding. But, only the wire to be shielded follows nondefault rule where      as shiled wire is being routed with regular width . My intension or purpose is to get both shielding and signal wires of nondefault widths. 

 

Is there any commands or options for this . Please tell me.

 

Regards,

K.VB

 

Parents
  • wally1

    Nanoroute only routes shield nets with the default width. To route the shield nets at wider widths you need to use a custom router such at the Virtuoso Custom Router or the mixed signal router. The following solution provides more details:

    http://sourcelink.cadence.com/docs/db/kdb/2004/Mar/11130650.html

Reply
  • wally1

    Nanoroute only routes shield nets with the default width. To route the shield nets at wider widths you need to use a custom router such at the Virtuoso Custom Router or the mixed signal router. The following solution provides more details:

    http://sourcelink.cadence.com/docs/db/kdb/2004/Mar/11130650.html

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.