Stats

  • Locked Locked
  • Replies 11
  • Subscribers 92
  • Views 17609
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to tell encounter to create vias with minimum number of row as 2.

diablo
There is single row of via on Metal Top generated by encounter when sroute is run which is violating DRC rule  that minimum number of row is 2 for Metal Top. I was going through documentation to make encounter create vias on top metal with minimum 2 rows, this is what i found but didn't work. I ran this before i ran sroute.

 setViaGenOption -create_double_row_cut_via 1

I would appreciate if you could suggest the right way to do it.

Thanks in advance
Parents

  •  Thanks!

    Can you upload your tech LEF to the service request? The .tf file is not used in Encounter, but the non-sroute methods where you are getting the correct vias are getting the info from somewhere, and that should be the tech LEF. So we need to see the tech LEF and then figure out why SRoute is not following it. (I can't seem to post directly to the service request - I guess they work a bit differently than CCRs.)

     

Reply

  •  Thanks!

    Can you upload your tech LEF to the service request? The .tf file is not used in Encounter, but the non-sroute methods where you are getting the correct vias are getting the info from somewhere, and that should be the tech LEF. So we need to see the tech LEF and then figure out why SRoute is not following it. (I can't seem to post directly to the service request - I guess they work a bit differently than CCRs.)

     

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.