Stats

Locked Locked
Replies 6
Subscribers 91
Views 14928
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to change use clock on nets?

Hi,

I used CTS to buffer signal nets in my design at place stage. once the buffering was over I loaded the actual CTS spec and proceed furthur but these nets r having use clock property. Now My design is fully routed, Can any one tell a procedure to change use clock property to signal for these nets.

Regards,

suresh

Parents

BobD over 14 years ago

Use:
dbSet [dbGetNetByName <net_name>].isCTSClock 1
I'll do some testing to see if there's a way to get CTS to automatically trigger the markings based on what it traces. I'll let you know what I find.
-Bob
Cancel
Vote Up 0 Vote Down

Cancel

Reply

BobD over 14 years ago

Use:
dbSet [dbGetNetByName <net_name>].isCTSClock 1
I'll do some testing to see if there's a way to get CTS to automatically trigger the markings based on what it traces. I'll let you know what I find.
-Bob
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.