Stats

  • Locked Locked
  • Replies 3
  • Subscribers 92
  • Views 13407
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NRDB-1005 warning

mwhite

If "setOptMode -fixFanoutLoad" true is applied before post route optimization, this warning gets generated during post route optimization:

  #WARNING (NRDB-1005) Can not establish connection to PIN a at (10.220 15.540) on M1 for NET B2T. The NET is considered partially routed.

Is this something I should be concerned?  Will the tool fix any issue associated with this?  Is there a way to make sure that this is not causing an issue?

Thanks!

Parents

  • Yes, you can ignore the warning if everything is connected properly. This solution provides some more insight into the message:

    http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNumber=11712200

    Regards,

    Brian

Reply

  • Yes, you can ignore the warning if everything is connected properly. This solution provides some more insight into the message:

    http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNumber=11712200

    Regards,

    Brian

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.