Stats

  • Locked Locked
  • Replies 4
  • Subscribers 92
  • Views 14047
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

how max_sink_trans value is going to affect the timing of my design

gops

 Max_Sink_trans value specifies the clock slew, can some one please let me understand how it is going to affect the timing of my design? Please let me know if it has to be less than the max_transiton_delay in liberty file? or the max_transiton_delay is for the Dpins of the flip flops and max_sink_trans is not dependent on the transtion delay for which the library is characterized.thanks

Parents

  •  HI Kari,

     

    thank you very much for the reply.Can you clarify the following queries pls.

    1) in the library there is a default_max_trans value .is this applicable for both "D" pin and "clk" pin of the flip flop in the library? or just for "D" pin.

     

    2) Can you pls elaborate on how the max_sink_trans value is going to affect delays of the flip flops?

Reply

  •  HI Kari,

     

    thank you very much for the reply.Can you clarify the following queries pls.

    1) in the library there is a default_max_trans value .is this applicable for both "D" pin and "clk" pin of the flip flop in the library? or just for "D" pin.

     

    2) Can you pls elaborate on how the max_sink_trans value is going to affect delays of the flip flops?

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.