Stats

  • Locked Locked
  • Replies 1
  • Subscribers 92
  • Views 13334
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Manual CTS

nitin kala01

Hi,

Please give an example to build H-tree CTS in encounter. 

Thanks,

Nitin 

Parents

  •  

     Hi nitin,

    you can use below command for that...

    cleanupSpecifyClockTree

    clockDesign  -specFile *.ctstch  -outDir -skipTimedesign -macromodel *.ctsmdl

    for that you must need .ctstch file in which all clock specification contain.

    And nowday pepole are using ccopt you can also refer that document from net.

    Thanks,

    Ajay

Reply

  •  

     Hi nitin,

    you can use below command for that...

    cleanupSpecifyClockTree

    clockDesign  -specFile *.ctstch  -outDir -skipTimedesign -macromodel *.ctsmdl

    for that you must need .ctstch file in which all clock specification contain.

    And nowday pepole are using ccopt you can also refer that document from net.

    Thanks,

    Ajay

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.