Stats

  • Locked Locked
  • Replies 0
  • Subscribers 91
  • Views 13083
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

set_max_delay attribute

cosmokramer

Hi All,

   Thanks for your time.

I have some set_max_delay settings on input and output ports.

I would like to query them in ETS. Is there a way to query them.

Ex:- I have a collection of in2reg paths and I would like to query the set_max_delay attribute( This is reported in + Path Delay of timing report)

Other End Arrival Time          1.829
- Clock Gating Setup            0.059
+ Path Delay                    0.700
+ CPPR Adjustment               0.000
- Uncertainty                   0.100
= Required Time                 2.370
- Arrival Time                  0.191
= Slack Time                    2.180
 

I would appreciate if anybody can provide some pointers.

 

Regards

cosmo

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.