Stats

Locked Locked
Replies 5
Subscribers 91
Views 17638
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

global net connections for VSS are missing after the save

anil chatrathi over 10 years ago

Hi All,

I have design, where FP is done and global net connection rules are created and saved the database.

If I load the database the connections are missing for only for VSS in all std cells giving the below errors:

**ERROR: (ENCDB-1220): A global net connection(GNC) rule for connecting pin 'VSS' of cell 'AND' to global net 'VSS' was specified. The connection cannot be made because the ground pin and the power net are not of the same polarity. Check the imported design and make sure the GNC rule is correctly specified or generated.

I tried reconnecting the global nets but give the same error above.

Please help me if any one face this kind of issue.

Regards,

Anil

Parents

anil chatrathi over 10 years ago

Thanks, kari. Actually these nets ( VDD and VSS) are defined in the input netlist with out giving any atrributes. This is creating the isse.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

anil chatrathi over 10 years ago

Thanks, kari. Actually these nets ( VDD and VSS) are defined in the input netlist with out giving any atrributes. This is creating the isse.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.