Stats

  • Locked Locked
  • Replies 0
  • Subscribers 91
  • Views 1640
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Innovus write_netlist -phys with no POWER/GROUND INOUT in main module

Paulo Aguirre

Hello all,

I am using Innovus for my physical synthesis.

I am writing the netlist with the command:  write_netlist -phys ../results/logic_control.v

My power/ground nets are DIGI_VDD and DIGI_GND. However, there is no power/ground input in the main module.

The logic gates connection with  DIGI_VDD and DIGI_GND nets are ok.

Is there a way to include the power/ground inputs in the main module? I am using Innovus v20.10.

Thanks in advance.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.