Stats

  • Locked Locked
  • Replies 1
  • Subscribers 65
  • Views 848
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IUS 6.11 USR3 - worklib is not updated after compiling

haikom

Hi,

I installed the nclaunch version 6.11 at a linux machine (RedHat 4 Enterprise Ed.). After this I configured the product so that all vhdl std. libraries where compiled. When I try to compile vhdl or verilog code, there is no change in the worklib (no '+' at the left side of the worklib)!!! The older version (IUS 5.7) worked whithout problems.

Does someone has an idea, what causes this problem?

Kind regards

haikom

  • Hi all,

    the problem seems to be solved. I looked at the environment variables an saw, that there were two entries:

    "$IUSDIR/tools/nclaunch/bin/64bit" AND "$IUSDIR/tools/bin"

    After I removed the first entry, the problem with the non-updated worklib was solved. The I looked into the install.pdf and there is written, that only the "instDIR/tools/bin"  path has to be added to the PATH variable. So this was my fault :)

     Regards

    haikom

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.