Stats

  • Locked Locked
  • Replies 0
  • Subscribers 65
  • Views 15202
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

wreal to logic connect module

diablo

For our mixed signal top level verification, we have wreal models for all our analog blocks ( no electrical). I am trying to run a mixed simulation using irun. Starting INCISIV 11.1, there is an automatic insertion of a connect module between wreal to logic using R2L and L2R connect modules.

I am using, irun +dr_info -discipline logic -disres detailed -chkdigdisp -r2l_ie -iereport ams.scs ./source_files.v ./source_files.vams ./ams_tb.sv

where, ams.scs has

tran tran stop=100u amsd { ie vsup=1.8 instport="ams_tb.gate_vdd.O" ie vsup=1.8 instport="ams_tb.gate_vpp.O" ie vsup=5.0 instport="ams_tb.gate_vddio.O" ie vsup=5.0 instport="ams_tb.dut.pad44.VDD2" ie vsup=5.0 instport="*.VDDA_5V0" }

The error I get is ncelab: *E,DSPMM: Incompatible discrete disciplines ams_tb.gate_vdd.O(ddiscrete_1_8) connected to ams_tb.dut.pad44.VDD1(logic).

I am not being able to resolve the discipline resolution correctly. From my understanding, the tool should be able to insert connect module(R2L) between discipline ddiscrete_1_8 and logic. Is there a specific command or a flow I am missing here?

Thanks a lot in advance.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.