Stats

  • Locked Locked
  • Replies 3
  • Subscribers 65
  • Views 14045
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

specman clock

hellohi

Hi

i need to use specman clock for the simulation in standalone mode instead of DUT clock. I read about si_util_time_mgr in a cadence newsletter.

http://www.cadence.com/newsletters/incisiveplatform/incisive_q406.pdf?CMP=NLC-TD5628415825 

But it is not working. Is it possible to get a specman clock to handle the timing in the verification environment? Please help on this

Parents

  • Thank you for the response,

    I tried as you mentioned, but the simulation/TCMs are not progressing but the time. Time is going infinity but there is no TCM invoked. This is the case when the TB clock is generated but not used.

    If I dont generate TB clock, it is not at all progressing with sys.any and simulation is stopped. 

     

     

Reply

  • Thank you for the response,

    I tried as you mentioned, but the simulation/TCMs are not progressing but the time. Time is going infinity but there is no TCM invoked. This is the case when the TB clock is generated but not used.

    If I dont generate TB clock, it is not at all progressing with sys.any and simulation is stopped. 

     

     

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.