Stats

  • Locked Locked
  • Replies 1
  • Subscribers 65
  • Views 13398
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Black boxing issue in IFV

niraj10
I am facing problem while black boxing to end-IPs. The one IP contains signal which helps to start the system. So, I can't do black box to it. Still I want to check connectivity between those two IPs. What should I do?

  •  The connectivity app is only checking the physical connections between the IPs, not the functionality of the IPs, so you should not need to initialise / reset anything. To give an example: to check the DDR IP is connected correctly to the pads, IFV is only checking the wiring so that DQ[0] on the IP connects only to padDQ0. IFV is not testing whether the IP block drives any part of the DDR protocol.

     

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.