Stats

  • Locked Locked
  • Replies 7
  • Subscribers 64
  • Views 20761
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

selecting a current in a node in post-layout simulation

Charanraj Mohan

Hi,

I am doing post layout is a big schematic and I want to see the current at a particular node. When I choose a layer, I can see that its voltage drops to ADE L environment. How to select the current in a node in parasitic extracted layout so that it comes in the ADE L output plotting list ??

Thanks in advance

Parents

  • There must be instances in your extracted view, because otherwise there would be no devices when it was netlisted. That's how extracted views work!

    I don't know what version you're using, or even which extraction tool you're using, but if it's a recent enough version you should be able to use Window->Assistants->Navigator and select instances through that too.

    Anyway, I've probably reached the limit of the help I can offer without seeing your setup, so I think if this doesn't help, you really will have to go via customer support.

    Regards,

    Andrew.

Reply

  • There must be instances in your extracted view, because otherwise there would be no devices when it was netlisted. That's how extracted views work!

    I don't know what version you're using, or even which extraction tool you're using, but if it's a recent enough version you should be able to use Window->Assistants->Navigator and select instances through that too.

    Anyway, I've probably reached the limit of the help I can offer without seeing your setup, so I think if this doesn't help, you really will have to go via customer support.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.