Stats

Locked Locked
Replies 5
Subscribers 64
Views 4187
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I want to import with verilog in virtuoso(icfb)

JOILEB over 6 years ago

I have a standard cell lib with layout view, sch view, symbol

and I want to import verilog file which is composed o gate standard cell

when I use virtuoso File -> import -> verilog menu

I fill with Target Library Name, Reference Libraries, Verilog Files To Import, and Verilog Cell Modules

after push Apply or OK button

CIW says VerilogIn import completed. Plese look at logfile ./verilogIn.log

the Log says @(#)$CDS: ihdl.exe versin 5.1.0 10/28/2008 10:23 (cicln03) $ today's DATE

When I look Library Manager -> target library there is nothing

so I want to know How can I import verilog file

Parents

Andrew Beckett over 6 years ago

That sounds reasonable other than using a 11 year old version of the software. I can't see from what you've shown above why it should be failing. Is there a good reason why you're using such an ancient version?

Without seeing the data you're trying to import I'm not sure anyone can help that much - perhaps you should contact customer support (although there is a bit of a limit to what we can do if you're using such an old, no-longer-supported version).

Regards,

Andrew.
Cancel
Vote Up +1 Vote Down

Cancel
JOILEB over 6 years ago in reply to Andrew Beckett

There is a reason why I using such an ancient version. because foundary vendor offer that version recommanded.

When I using IC 6.1.7 ignoring foundary vendor's recommandation, the log syas ERROR (VERILOGIN-540): visadev load failed
Cancel
Vote Up 0 Vote Down

Cancel
Andrew Beckett over 6 years ago in reply to JOILEB

I doubt the problem with IC617 has any thing to do with the foundry's recommendation. It's more likely to do with your environment setup.

See: ERROR (VERILOGIN-540): visadev load failed

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel
JOILEB over 6 years ago in reply to Andrew Beckett

Yes, that's right. I try to change tool's version to 6.1.5 and then try again. It works perfectly!!!!! but 6.1.7 version tool doesn't work again

So I conclude there are differences something
Cancel
Vote Up 0 Vote Down

Cancel

Reply

JOILEB over 6 years ago in reply to Andrew Beckett

Yes, that's right. I try to change tool's version to 6.1.5 and then try again. It works perfectly!!!!! but 6.1.7 version tool doesn't work again

So I conclude there are differences something
Cancel
Vote Up 0 Vote Down

Cancel

Children

Andrew Beckett over 6 years ago in reply to JOILEB

Did you look at the article I referenced which talked about ensuring that your PATH and LD_LIBRARY_PATH are setup correctly?

Either way, the best approach for this is customer support as I mentioned earlier.

Regards,

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.