Stats

  • Locked Locked
  • Replies 0
  • Subscribers 64
  • Views 1217
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AMS *F,MAXERR: Maximum error count of 50 reached (Total number of errors detected were 50).

nonameirvine

hi there,when I tried to save more signals from my AMS simulation, it will quit and saying- F,MAXERR: Maximum error count of 50 reached (Total number of errors detected were 50), but the adc_data[4:0] are real signals in my bench and I try to probe them in Mastero setting. Is there any way to ignore the SE error or increase the limitation to 5000?  thanks

xmsim: *W,VCDNAF: Analog objects are ignored in VCD/EVCD probes.
xmsim: *SE,PRBFAIL: No probes were created due to a probe command failure.
xcelium> probe -create -emptyok -database ams_database_vcd -vcd {tb_xsim_canarywood_a0_top.Itop.Itop.adc_data[4]}
xmsim: *W,VCDNAF: Analog objects are ignored in VCD/EVCD probes.
xmsim: *SE,PRBFAIL: No probes were created due to a probe command failure.
xcelium> probe -create -emptyok -database ams_database_vcd -vcd {tb_xsim_canarywood_a0_top.Itop.Itop.adc_data[3]}
xmsim: *W,VCDNAF: Analog objects are ignored in VCD/EVCD probes.
xmsim: *SE,PRBFAIL: No probes were created due to a probe command failure.
xcelium> probe -create -emptyok -database ams_database_vcd -vcd {tb_xsim_canarywood_a0_top.Itop.Itop.adc_data[2]}
xmsim: *W,VCDNAF: Analog objects are ignored in VCD/EVCD probes.
xmsim: *SE,PRBFAIL: No probes were created due to a probe command failure.
xcelium> probe -create -emptyok -database ams_database_vcd -vcd {tb_xsim_canarywood_a0_top.Itop.Itop.adc_data[1]}
xmsim: *W,VCDNAF: Analog objects are ignored in VCD/EVCD probes.
xmsim: *SE,PRBFAIL: No probes were created due to a probe command failure.
xcelium> probe -create -emptyok -database ams_database_vcd -vcd {tb_xsim_canarywood_a0_top.Itop.Itop.adc_data[0]}
xmsim: *W,VCDNAF: Analog objects are ignored in VCD/EVCD probes.
xmsim: *SE,PRBFAIL: No probes were created due to a probe command failure.
xmsim: *F,MAXERR: Maximum error count of 50 reached (Total number of errors detected were 50).

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.