Hey everyone so to make it short I have been making a schemathic for school and it appears there is no T805 in the library (its a simple chip with In (leg number 1) out (leg number 2) and com (leg number 3)
So how can i fix this I tried adding every library with no luck please help me!
Your query appears to be flawed. The device I believe you are looking for is a 7805 not T805.
It is a standard 5V regulator. Have as look in your libraries for regulators or type *7805* in your search.
EDIT:I found it it was LM7805 so 7805 did not find it...
now im facing a new problem it does not have a COM(leg number 2) at the bottom how can i add it?
Can you post the Mfr and Mfr PN for the part?
The COM pin will be there. It may not be displayed.
What package are you using? Capture CIS or Design Entry HDL
In either you could try RMB on the device and see if power pins are set to not visible.
It does but the pin is invisible. Select the part then RMB - Edit Part to see the pin or change it to a visible one. It would automatcially connect to a net called GND if you keep it as invisible.
All the basics for Capture are available from Help - Learning OrCAD Capture - then click on the OrCAD Capture Tutorial, this explains most of the basics...