Stats

  • Locked Locked
  • Replies 15
  • Subscribers 65
  • Views 23891
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

spectre 32 bit or 64 bit?

upengan

Hi,

Ok, I am just an administrator. One of my users is adking me, why spectre gets invoked from 32bit directory instead of 64bit. 

 Here is the log snippet,

 Memory  available: 187.1503 MB  physical: 5.8504 GB
CPU(1 of 4):  CPU 0  Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz  1995.000MHz

Simulating `input.scs' on yamdrok at 12:56:57 PM, Thur Jan 27, 2011 (process id: 32263).
Command line:
    /analog/cadence/mmsim71/tools.lnx86/spectre/bin/32bit/spectre  \
        input.scs +escchars +log ../psf/spectre.out +inter=mpsc  \
        +mpssession=spectre0_31221_4 -format sst2 -raw ../psf  \
        +lqtimeout 900 -maxw 5 -maxn 5
spectre pid = 32263

System is 4 processor,  model name    : Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz

OS also is 64 bit linux,  Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator version 7.1.0.060.isr4 -- 25 Mar 2009

 

If you need any other i/p let me know. Thank you.

Parents
  • abhierao

     Hey Andrew,

    I am facing a similar issue with my ADE, i am not able to run simulation due to these errors.  i am running ubuntu 13.1, Please help me fix the issue. I have tried the above methods to run in 64bit mode but didn't work, i tried changing the bin/sh file from DASH to BASH yet the issue persists. 

     
    Error found by spectre during AHDL read-in.
        ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB//bsource.va.bsource_1.ahdlcmi/Linux/../ahdlcmi.out for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again. If the reason for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model files, and any other information that can help identify the problem.
        ERROR (SFE-91): Error when elaborating the instance bsource_1. Simulation should be terminated.
    Error found by spectre during hierarchy flattening.
        ERROR (SFE-46): "/home/abhinand/work/gpdk045/../models/spectre/gpdk045_mos.scs" 51402: `r1': An instance of `bsource_1' can have at most 0 terminals (but has 2).

    here is my ahdlcmi.out file

     ahdlcmicompile: Compiling ahdlcmi in input.ahdlSimDB//bsource.va.bsource_1.ahdlcmi/Linux/ for Linux with optimize using gcc on Wed Jul  2 07:29:48 IST 2014 [5.0]
    ahdlcmicompile: Generating makefile
    PATH:  /home/abhinand/edatools/mmsim/tools.lnx86/cdsgcc/gcc/4.1/install/bin:/home/abhinand/edatools/mmsim/bin:/home/abhinand/edatools/mmsim/tools/bin:/home/abhinand/edatools/virtuoso/bin:/home/abhinand/edatools/virtuoso/tools/bin:/home/abhinand/edatools/virtuoso/oa_v22.41.022/bin:/home/abhinand/edatools/mmsim/tools/spectre/bin:/home/abhinand/edatools/virtuoso/tools/dfII/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    LD_LIBRARY_PATH:  /home/abhinand/edatools/mmsim/tools.lnx86/cdsgcc/gcc/4.1/install/lib:/home/abhinand/edatools/mmsim/tools/giganta/lib:/home/abhinand/edatools/mmsim/tools/mdl/lib:/home/abhinand/edatools/mmsim/tools/mmsim/lib:/home/abhinand/edatools/mmsim/tools/inca/lib:/home/abhinand/edatools/mmsim/tools/spectre/lib:/home/abhinand/edatools/mmsim/tools/dfII/lib:/home/abhinand/edatools/mmsim/tools/lib:/home/abhinand/edatools/virtuoso/tools/lib:/home/abhinand/edatools/virtuoso/oa_v22.41.022/lib/linux_rhel40_gcc44x_32/opt:/home/abhinand/edatools/virtuoso/tools/Qt/32bit/lib:/home/abhinand/edatools/virtuoso/tools/dfII/lib:/home/abhinand/edatools/virtuoso/tools/sev/lib:/home/abhinand/edatools/virtuoso/tools/inca/lib
    /home/abhinand/edatools/mmsim/tools.lnx86/perl/bin/perl: line 10: /home/abhinand/edatools/mmsim/tools.lnx86/perl/bin/cdsPerl: cannot execute binary file
    cp: cannot stat 'devicelisttemp': No such file or directory
    Can't exec "mpstat": No such file or directory at /home/abhinand/edatools/mmsim/tools.lnx86/spectre/ahdlcmi/bin/getCPUnum.pl line 41.
    /home/abhinand/edatools/mmsim/tools.lnx86/spectre/ahdlcmi/bin/gnumake -j2 -f GNUmakefile
    Can't exec "mpstat": No such file or directory at /home/abhinand/edatools/mmsim/tools.lnx86/spectre/ahdlcmi/bin/getCPUnum.pl line 41.
    gnumake: *** No rule to make target `obj/optimize/5.0/bsource_1.o', needed by `obj/optimize/5.0/bsource_1_libahdlcmi.so'.  Stop.
    gnumake: *** No rule to make target `obj/optimize/5.0/bsource_1.o', needed by `obj/optimize/5.0/bsource_1_libahdlcmi.so'.  Stop.

     Please guide me to clear this error.

     Thanks 

    Abhinand

Reply
  • abhierao

     Hey Andrew,

    I am facing a similar issue with my ADE, i am not able to run simulation due to these errors.  i am running ubuntu 13.1, Please help me fix the issue. I have tried the above methods to run in 64bit mode but didn't work, i tried changing the bin/sh file from DASH to BASH yet the issue persists. 

     
    Error found by spectre during AHDL read-in.
        ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB//bsource.va.bsource_1.ahdlcmi/Linux/../ahdlcmi.out for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again. If the reason for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model files, and any other information that can help identify the problem.
        ERROR (SFE-91): Error when elaborating the instance bsource_1. Simulation should be terminated.
    Error found by spectre during hierarchy flattening.
        ERROR (SFE-46): "/home/abhinand/work/gpdk045/../models/spectre/gpdk045_mos.scs" 51402: `r1': An instance of `bsource_1' can have at most 0 terminals (but has 2).

    here is my ahdlcmi.out file

     ahdlcmicompile: Compiling ahdlcmi in input.ahdlSimDB//bsource.va.bsource_1.ahdlcmi/Linux/ for Linux with optimize using gcc on Wed Jul  2 07:29:48 IST 2014 [5.0]
    ahdlcmicompile: Generating makefile
    PATH:  /home/abhinand/edatools/mmsim/tools.lnx86/cdsgcc/gcc/4.1/install/bin:/home/abhinand/edatools/mmsim/bin:/home/abhinand/edatools/mmsim/tools/bin:/home/abhinand/edatools/virtuoso/bin:/home/abhinand/edatools/virtuoso/tools/bin:/home/abhinand/edatools/virtuoso/oa_v22.41.022/bin:/home/abhinand/edatools/mmsim/tools/spectre/bin:/home/abhinand/edatools/virtuoso/tools/dfII/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    LD_LIBRARY_PATH:  /home/abhinand/edatools/mmsim/tools.lnx86/cdsgcc/gcc/4.1/install/lib:/home/abhinand/edatools/mmsim/tools/giganta/lib:/home/abhinand/edatools/mmsim/tools/mdl/lib:/home/abhinand/edatools/mmsim/tools/mmsim/lib:/home/abhinand/edatools/mmsim/tools/inca/lib:/home/abhinand/edatools/mmsim/tools/spectre/lib:/home/abhinand/edatools/mmsim/tools/dfII/lib:/home/abhinand/edatools/mmsim/tools/lib:/home/abhinand/edatools/virtuoso/tools/lib:/home/abhinand/edatools/virtuoso/oa_v22.41.022/lib/linux_rhel40_gcc44x_32/opt:/home/abhinand/edatools/virtuoso/tools/Qt/32bit/lib:/home/abhinand/edatools/virtuoso/tools/dfII/lib:/home/abhinand/edatools/virtuoso/tools/sev/lib:/home/abhinand/edatools/virtuoso/tools/inca/lib
    /home/abhinand/edatools/mmsim/tools.lnx86/perl/bin/perl: line 10: /home/abhinand/edatools/mmsim/tools.lnx86/perl/bin/cdsPerl: cannot execute binary file
    cp: cannot stat 'devicelisttemp': No such file or directory
    Can't exec "mpstat": No such file or directory at /home/abhinand/edatools/mmsim/tools.lnx86/spectre/ahdlcmi/bin/getCPUnum.pl line 41.
    /home/abhinand/edatools/mmsim/tools.lnx86/spectre/ahdlcmi/bin/gnumake -j2 -f GNUmakefile
    Can't exec "mpstat": No such file or directory at /home/abhinand/edatools/mmsim/tools.lnx86/spectre/ahdlcmi/bin/getCPUnum.pl line 41.
    gnumake: *** No rule to make target `obj/optimize/5.0/bsource_1.o', needed by `obj/optimize/5.0/bsource_1_libahdlcmi.so'.  Stop.
    gnumake: *** No rule to make target `obj/optimize/5.0/bsource_1.o', needed by `obj/optimize/5.0/bsource_1_libahdlcmi.so'.  Stop.

     Please guide me to clear this error.

     Thanks 

    Abhinand

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.