Stats

  • Replies 4
  • Subscribers 65
  • Views 15355
  • Members are here 0
More Content

Default finger padstack and export .mcm to .brd

USSH

 Hi all,

Could you please let me know how to change the default padstack in APD. By default, in Wirebone Setting, there are 2 padstack (WB_TACKPOINT, WIREBONE_FINGER). Can i add more default finger padstack ?

 I create a .mcm module then place it into .brd but there are errors showing that layer inconsistence between .mcm and .brd. How can i deal with this issue ?

Thank you,

USSH 

Parents

  •  Hi Tyler,

    That's so weird.  Route -> Wire Bond -> Settings does not allow me to browse to other customized padstack, instead, there are ony 2 default padstack. I also noted that "Global Wire Bond Constraints" does not affect to the design, for instance, i changed "Wire physical properties Diameter" to 1 mil and checked "Feasibilitty mode" but nothing work. :(.

    I will raise my concerns to Cadence application enigneer for their adivices.

    Thank you,

     

     

Reply

  •  Hi Tyler,

    That's so weird.  Route -> Wire Bond -> Settings does not allow me to browse to other customized padstack, instead, there are ony 2 default padstack. I also noted that "Global Wire Bond Constraints" does not affect to the design, for instance, i changed "Wire physical properties Diameter" to 1 mil and checked "Feasibilitty mode" but nothing work. :(.

    I will raise my concerns to Cadence application enigneer for their adivices.

    Thank you,

     

     

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.