Stats

  • State Not Answered
  • Replies 2
  • Subscribers 49
  • Views 478
  • Members are here 0
More Content

Orcad 22 netlist gives errant rat in Allegro

bustercrabby

This has never happened before so I'm confused.

I have two symbols in my schematic that each have a pin called PAD. Both are 'Power' pins. Both have no connects attached and show up as 'Is No Connect' in the pin properties window.

After recreating the netlist and importing it into Allegro, there is a rat showing a connection between the two pins that are not supposed to be connected. Any thoughts on why this is happening? I think it is on the Orcad Netlist side as opposed to the Allegro side.

Thanks for any help you can give,

bustercrabby

Parents
  • Jeet
    0

    Can you share a snapshot on how you have designed your component and what is the visibility of PAD (Power) pin ?

Reply
  • Jeet
    0

    Can you share a snapshot on how you have designed your component and what is the visibility of PAD (Power) pin ?

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.