Stats

  • Replies 12
  • Subscribers 159
  • Views 16172
  • Members are here 0
More Content

Help me with Via parameter !

luanvn81

 Hi everyone!
I have a skill file ( download from internet), I'm researching it but there are something I don't understand, so I hope evertone can help me. And here is it:
*****************************************************************
axlCmdRegister( "myCompanyViaReport" `myCompanyViaReport)
(defun myCompanyViaReport ()
; Find all of the vias in the design
allViasInDesign=list()
originalVisible=axlVisibleGet()
designName = axlCurrentDesign()
axlVisibleDesign(t)
axlShell("redisplay")
axlSetFindFilter(?enabled '(noall vias) ?onButtons '(noall vias))
allViasInDesign=axlGetSelSet(axlAddSelectAll())
axlClearSelSet()
; Open a file to work on
if(length(allViasInDesign)==0
then
axlUIConfirm("No vias in this design. Please try another design.")
else
writeOutFile = outfile("./TBL-DesignViaReport.csv" "w")
fprintf(writeOutFile strcat("Design Via Report for " designName "\n\n"))
fprintf(writeOutFile "Via Location,Via Net Name,Padstack Name,Via Start
Layer,Via End Layer\n")
; Output data for each via to the file
foreach(via allViasInDesign
viaLocation = sprintf(nil "%L:%L" car(via->xy) cadr(via->xy))
fprintf(writeOutFile strcat(viaLocation ","))
fprintf(writeOutFile strcat(via->net->name ","))
fprintf(writeOutFile strcat(via->name ","))
fprintf(writeOutFile strcat(car(via->startEnd) ","))
fprintf(writeOutFile strcat(cadr(via->startEnd) "\n"))
);end foreach via allViasInDesign
; Close the file and wrap up
fprintf(writeOutFile "END OF FILE")
close(writeOutFile)
axlVisibleSet(originalVisible)
axlShell("redisplay")
axlUIConfirm( "Report has been generated in your working directory." )
; This next line launches Excel and displays the report
axlHttp("TBL-DesignViaReport.csv")
);end if length(allViasInDesign)==0
);end defun myCompanyViaReport
********************************************************************
??????????????????
- How can I know paramerter of Vias such as ViaLocation, via net name, via name, via start layer, end layer in order to make this:
================================================================
viaLocation = sprintf(nil "%L:%L" car(via->xy) cadr(via->xy))
fprintf(writeOutFile strcat(viaLocation ","))
fprintf(writeOutFile strcat(via->net->name ","))
fprintf(writeOutFile strcat(via->name ","))
fprintf(writeOutFile strcat(car(via->startEnd) ","))
fprintf(writeOutFile strcat(cadr(via->startEnd) "\n")
================================================================

I'm using Allegro 16.3 and it seem can't run with BB via.
Tks!
Luanvn81

Parents

  •  Hi Dave!

    Thank you for your reply. I will  read the manuals clearly as your advice. 

    Can you show me one problem more?

    I wanna count via layerVP24 and Vp22 and my  code skill like below:

    ..........

     axlVisibleDesign(nil)
    axlVisibleLayer("via class/VP24" t)
    axlShell("redisplay")
    axlSetFindFilter(?enabled '(noall vias) ?onButtons '(noall vias))
    allViasInDesign=axlGetSelSet(axlAddSelectAll())
    axlClearSelSet()
    writeOutFile = outfile( "TempFile.tmp" ) ; open write tmp file
    foreach(via allViasInDesign
    viaLocation = sprintf(nil "%L:%L" car(via->xy) cadr(via->xy))
    netname=via->net->name
    if(nindex(netname "HC")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "LC")!=nil then
    ;fprintf(writeOutFile strcat("Top" " layer" ","))
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "GND")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    );end HC
    );end LC
    );end GND
    );end foreach

    axlVisibleDesign(nil)
    axlVisibleLayer("via class/VP22" t)
    axlShell("redisplay")
    axlSetFindFilter(?enabled '(noall vias) ?onButtons '(noall vias))
    allViasInDesign=axlGetSelSet(axlAddSelectAll())
    axlClearSelSet()
    foreach(via allViasInDesign
    viaLocation = sprintf(nil "%L:%L" car(via->xy) cadr(via->xy))
    netname=via->net->name
    if(nindex(netname "HC")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "LC")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "GND")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    );end HC
    );end LC
    );end GND
    );end foreach
    ............................

    my problem is:

    How can I write out via list of VP22 in another collumn(as below)

                    Layer Vp24                                                                    Layer Vp22

    ---------------------------------------------------------------------------------------------------------------------

      Vianame    Via location   Via net name                         Vianame    Via location   Via net name

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx   

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx  

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx  

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx  

     Tks.

    Luan.

     

     

Reply

  •  Hi Dave!

    Thank you for your reply. I will  read the manuals clearly as your advice. 

    Can you show me one problem more?

    I wanna count via layerVP24 and Vp22 and my  code skill like below:

    ..........

     axlVisibleDesign(nil)
    axlVisibleLayer("via class/VP24" t)
    axlShell("redisplay")
    axlSetFindFilter(?enabled '(noall vias) ?onButtons '(noall vias))
    allViasInDesign=axlGetSelSet(axlAddSelectAll())
    axlClearSelSet()
    writeOutFile = outfile( "TempFile.tmp" ) ; open write tmp file
    foreach(via allViasInDesign
    viaLocation = sprintf(nil "%L:%L" car(via->xy) cadr(via->xy))
    netname=via->net->name
    if(nindex(netname "HC")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "LC")!=nil then
    ;fprintf(writeOutFile strcat("Top" " layer" ","))
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "GND")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    );end HC
    );end LC
    );end GND
    );end foreach

    axlVisibleDesign(nil)
    axlVisibleLayer("via class/VP22" t)
    axlShell("redisplay")
    axlSetFindFilter(?enabled '(noall vias) ?onButtons '(noall vias))
    allViasInDesign=axlGetSelSet(axlAddSelectAll())
    axlClearSelSet()
    foreach(via allViasInDesign
    viaLocation = sprintf(nil "%L:%L" car(via->xy) cadr(via->xy))
    netname=via->net->name
    if(nindex(netname "HC")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "LC")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    else
    if(nindex(netname "GND")!=nil then
    fprintf(writeOutFile strcat(via->name ","))
    fprintf(writeOutFile strcat(viaLocation ","))
    fprintf(writeOutFile strcat(via->net->name "\n"))
    );end HC
    );end LC
    );end GND
    );end foreach
    ............................

    my problem is:

    How can I write out via list of VP22 in another collumn(as below)

                    Layer Vp24                                                                    Layer Vp22

    ---------------------------------------------------------------------------------------------------------------------

      Vianame    Via location   Via net name                         Vianame    Via location   Via net name

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx   

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx  

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx  

       xxxxx           xxxxxx             xxxxxx                          xxxxx           xxxxxx             xxxxxx  

     Tks.

    Luan.

     

     

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.